Dual Fuel Range Cooker With 13amp Plug
Are you a home chef who enjoys the fast cooking control of gas cooktops but wants an electric oven to bake? Discover a dual-fuel range cooktop that offers the best of both worlds.
Many experienced home chefs prefer gas cooktops due to their superior temperature control and capacity to use sophisticated cooking techniques, such as grilling. These powerful stoves are costly, especially if they require an additional gas connection and an electrician for installation.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as a gas and electric oven) you'll require a 13 amp plug. The plug should be wired by a licensed electrician into the cooker ring.
This ensures that the current passing through the plug is secure and not excessive, which could result in an electrical fire risk. The plug is equipped with an electric fuse that regulates the current. The fuse goes out when the current flows through it over its capacity, which safeguards the appliance from over-charge of electricity.
The fuse is classified at 13 amps, as shown on the top of the plug and it indicates the maximum current that the plug can carry without causing damage to the appliance or overheating the socket. It is essential that when replacing fuses you always use the same rated amperage as the original. If you replace the fuse using one with an alternative rating, you are at risk of overheating the socket, and potentially putting you and others at danger.
A 13 amp fuse is likely to be a type of ceramic, which is very durable and is able to withstand extreme temperatures generated by the range cooker. Ceramic elements are also fire-resistant, and is therefore a better option than other types.
There are several ways in which a 13 amp plug could be installed. It could be wired to an existing live socket. the flex is connected to this by a screw or plastic jaw type cord clamp. The plug is then placed in a secure position and tightened, making sure that the cord clamp is secure.
Some plugs may include a wiring diagram on cardboard over the pins, and these should be removed prior to connecting the wires. It is essential that the wires are trimmed to the correct length as leaving them too long can result in them becoming crushed when the plug cover is replaced. The earth wire must be the longest to connect it prior to the line and neutral pins.
How do I fit a 13amp plug?
The vast majority dual fuel range cookers sold in UK are equipped with a 13 amp plug. This is vital because ovens can draw substantial current, while standard plug sockets only have a rating of 10 amps.
Generally speaking new appliances should be fitted with a plug at the point of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug and this is the reason for the problem.
The first thing to do when connecting a cooker to an existing plug socket is to make sure that the fuse rating of the fuse box is in line with that of the plug. This is very important as an incorrectly sized fuse could be dangerous.
It is also advisable to check that the fuse is seated in the cartridge and there isn't any movement within it. The next step is to prepare the flex to be used. The first step is to remove the sheathing from the flex, exposing the three insulated conductors within. Utilize a utility knife to cut the sheathing just beyond the grip of the cord at the point of entry into the plug. This will not penetrate the insulated conductors. The nick should be wide enough to allow the sheathing to split and then expand when it is pulled back revealing the cable underneath. Cut off the excess sheathing, leaving about 40mm beyond the flex.
The flex should be positioned over the plug, with the earth terminal on the top and the live and neutral terminals on the bottom. Utilizing the colored conductors to guide you, the sheathing is then removed from each pin and the internal cable is fixed to the appropriate terminal by using the cord grip. If the plug has a clamp for cords that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Connect each wire that is insulated to the appropriate terminal by using the plug's channel. Start with the earth conductor first, then the neutral and finally the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for the 13amp plug is 3kw at 230 volts. This is a significant amount of power but the standard fuse on the UK plug will not fail until the cable reaches a hazardous temperature. It is important to be aware of the amount of power you're using in your kitchen, as a defective plug or socket can lead to a fire.
The ceramic fuses that are used in plugtops measure around 25mm in diameter and are designed for mains voltages of 240V. They'll be marked with an BS kitemark or similar marking on the side, and they contain sand. There are also cheaper glass or plastic alternatives, but they should never be used with a live plug, except if you don't want to cause a fire and be electrocuted!
Most dual fuel range cookers in the UK require a hard-wired connection and are not able to plug directly into an outlet on the wall. They are usually connected via an exclusive cooker circuit, that is only suitable for appliances with a maximum of 20 amps.
You can test the ring circuit of your home by checking the fuse box, or by speaking to an electrician nearby. They will be able to inform you whether the sockets in your home are on the same ring or separate and if there is a dedicated circuit for your oven.
If you're considering buying a new dual fuel range cooker the size of your kitchen is an important aspect to take into consideration. We have a wide range of cookers that can fit any space. Select from small 50-60cm dual-fuel models, or the huge 90cm+ double ovens by leading brands such as Rangemaster and StovesAreUs.
We also offer a wide variety of multifunction electric and gas cookers. These versatile machines let you cook a variety of dishes such as pasta, casseroles and curries!
Explore our full range of Cookers in Currys on our website or visit us in store to take a look. We provide free delivery and home installation on selected range cookers, and we also offer flexible payment options. Our team is available to answer any questions you have. You can contact us via email or by phone. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot of confusion about the maximum current draw for the cooker switch. The majority of cookers are hard-wired and connected to a dedicated oven-ring circuit and not a standard socket. This is because they will typically consume more than 20 amps of power when both the electric oven and gas hob are in use.
Therefore, you cannot find a dual range cooker with a fuel source that can be fitted to a standard socket, as this could create a serious fire risk and would be against electrical regulations. range cooker dual fuel licensed electrician will install any new electrical wiring to the kitchen cooker, and they will ensure that the load (both the oven and hob) do not exceed the power capacity of the circuit.
The benefits of a dual-fuel range cooker are the receptive heating of a gas cooktop with the precision of an electric oven. This is why they are highly sought-after by chefs and home cooks alike. Dual fuel range cookers are perfect for trying out different cooking techniques, like searing or grilling.
When purchasing a new range cooktop, you must take into consideration a variety of factors that include size, performance and price. In addition, you will also need to make sure that your house has the right gas hook-up for the appliance. If dual fuel cooker range 're not sure then it's advisable to have a Gas Safe engineer inspect your property prior to installation.
Currys' dual fuel range cookers are available in a variety of models to meet all budgets. From affordable models by Indesit and Zanussi to our own Essentials collection. If you are looking for something more sophisticated, we stock a variety of top JennAir models, which feature a number new features.
If you are buying a brand new dual fuel range cooker, it is important to check the owner's manual for specific information regarding the gas and electrical requirements. You will require an electric connection to your home. A plumber may be required to install it for you. It is also possible to require an individual cooker-ring circuit installed by a qualified electrical engineer.